Epson EMP-TW10H 사용자 설명서
Part Names and Functions-
5
Before Using the Projector
Rear
Base
• Input B port s P.11
Inputs signals from a computer.
• remote control infrared
receiver s P.7
Receives signals from the remote
control.
control.
• power inlet s Quick
Reference Guide
Connects the power cable.
• Video port s Quick
Reference Guide
• S-Video port s Quick
Reference Guide
• security lock s P.24
Quick Reference Guide
Inputs audio signals to the projector. Connect using an A/V
cable, or a stereo RCA cable.
When using computer and video equipment alternately, swap
the cable or use an audio switch (commercially available).
cable, or a stereo RCA cable.
When using computer and video equipment alternately, swap
the cable or use an audio switch (commercially available).
• Control (RS-232C) port
Connects the projector to a
computer using an RS-232C
cable. This port is for control use
and should not be used by the
customer.
computer using an RS-232C
cable. This port is for control use
and should not be used by the
customer.
• remote control holder s P.7
Store the remote control in here when
not in use.
not in use.
• Input A port s Quick
Reference Guide
• speaker
• Ceiling mount fixing points
(3 points)
Install the optional ceiling mount
here when suspending the projector
from the ceiling.
here when suspending the projector
from the ceiling.
• lamp cover s P.22
Open this cover when
replacing the lamp inside
the projector.
replacing the lamp inside
the projector.
• air filter (air intake vent)
Prevents dust and other foreign
particles from being drawn into
the projector. Open the cover
when changing the air filter.
particles from being drawn into
the projector. Open the cover
when changing the air filter.