Epson EMP-505 / 715 사용자 설명서

74 - Inserting the memory card

■ Inserting the memory card

A memory card is required when using the EasyMP functions.

●  Memory cards that can be used

The following memory cards which are compatible with the Type II ATA standard can be used.
· Compact flash (a PC card adapter is required during mounting)
· Smart media (a PC card adapter is required during mounting)
· Memory stick (a PC card adapter is required during mounting)
· ATA flash card
· Micro drive (a PC card adapter is required when mounting.)

●  Method of insertion

Refer to the card adapter's instruction manual for details on the direction it should be 
inserted.

Insert the card firmly to the back, as shown in the illustration.

· The card will not be able to be inserted to the back if it is inserted back to front. Do not 

apply excessive force in this case.

· The access lamp for the PCMCIA card slot will change as follows:

Extinguished: Access not achieved or the card has not been inserted.
Illuminated in orange: Access achieved.(Do not remove the memory card while it is being 
accessed.)
Illuminated in red: A non-usable card has been inserted.

· FAT12/16 formatted memory cards can be recognized.
· Depending on the manufacturer, there are smart media adapters that are write-protected 

and malfunction when an attempt is made to write in them. Ensure that the write-protect 
has been released prior to using smart media.

Access lamp

Rear