Epson EMP-100NL 사용자 설명서

 Ending - 43

End projection in accordance with the following procedure.

A message to confirm that the power needs to be switched off will be displayed.

The lamp will be extinguished, the Operation Indicator will blink in orange, and the cool-
down process will commence.

The Operation Indicator will change from blinking to being illuminated in orange once the 
cool-down process has been completed. The amount of time required for the cool down is 
approximately forty seconds (may be longer depending on the ambient temperature).

· Press a different button if the power is not to be switched off. The message will be erased 

after seven seconds if no buttons are pressed (the power will remain on).

· It is also possible to end projection by pressing the [Power] button as explained in proce-

dure #1 for more than one second (will assume the same status as if ending with proce-
dure #2).

· Button operations are not possible when the Operation Indicator is blinking in orange. In 

this event, please wait until full illumination has been attained.

Sync.

Sync.

T

ra

c

k

in

g

T

ra

c

ki

n

g

Power

Freeze

A/V Mute

E-Zoom

R/C ON

OFF

3

1

5

2

4

Enter

Esc

(Power OFF?)

Please press

     Key again

to power off.

Power

Power

Freeze

A/V Mute

E-Zoom

R/C ON

OFF

3

1

5

2

4

Enter

Esc

Sync.

Sync.

T

ra

c

k

in

g

T

ra

c

ki

n

g