Epson EMP-100NL 사용자 설명서
48 - Picture Quality Adjustment
Tracking Adjustments (when projecting computer images)
Adjusted when vertical stripes are apparent on the computer image.
1
Press the [Tracking +, -] button on the projector.
Synchronization Adjustments (when projecting computer
images)
images)
Adjusted when flashing, blurring and vertical noise are apparent on the computer image.
1
Press the [Sync +, -] button on the projector.
Calling out adjustment values
(when projecting computer images)
(when projecting computer images)
It is possible to record preset adjustment values and call them out when required.
1
Press the [Preset] button on the remote control.
The pre-registered numbers between preset #1 and preset #5 will change in sequence
whenever this button is pressed.
whenever this button is pressed.
Point
· There are cases when these adjustments must be made again if the values output from
the computer (resolution, display color) are amended after flashing and blurring have
been adjusted.
been adjusted.
· There are cases where flashing and blurring is caused by adjusting the brightness and
contrast*.
· Images will be projected more vividly if synchronization adjustments are made after the
tracking adjustments.
· Auto adjustments, tracking adjustments and synchronization adjustments are not possible
if no image signals are being input by the computer, such as when projecting video
images or displaying menus.
images or displaying menus.
· The preset values must be registered beforehand. (see page 65)
Sync.
Sync.
T
ra
c
k
in
g
T
ra
c
ki
n
g
Sync.
Sync.
T
ra
c
k
in
g
T
ra
c
ki
n
g
Esc
Menu
Comp1
P in P
Preset
Video
Help
- Volume +
Preset
Comp2/YCbCr
Auto
Resize