Epson EMP-100NL 사용자 설명서

 Computer Connections - 73

Establish a serial connection between the computer and projector when EMP Link V is being 
used. The computer and projector can be connected together with serial.

· Depending on the shape of the computer port, an adapter may be required for connection 

purposes. Refer to the computer’s instruction manual for further details.

· The connected computer is used to amend the projector settings and to perform opera-

tions. Connect the computer that is required to output projection images to the Computer 
#1 or Computer #2 port. (see page 25)

· Switch on the projector and ensure that the connection has been set up before using the 

software.

●  Windows Computers

Connect the projector’s Mouse/Com Port to the computer’s serial port with the use of the PC 
Serial Cable and Main Cable supplied.

Caution

· Ensure that the power supply to the projector has been switched off before attempting to 

establish the connection. Failure to observe this may result in equipment damage.

· Confirm the shape of the cable connector and the port before establishing the connection. If 

connections are forced despite the connector and port being different shapes, it may result 
in malfunctions and equipment damage.

PC SERIAL

Mouse/Com Port

Main Cable

 (supplied with the projector)

PC Serial Cable 

(supplied with the projector)

Serial Port