Epson EB-X30 사용자 설명서

Submenu

Function

Passphrase

Enter the passphrase. You can enter at least 8 and up to 63 single-
byte alphanumeric characters (colons and spaces cannot be
used).
When using it with EasyMP Network Projection, you do not
need to input the passphrase in the computer if it is the initial
(default) passphrase.
In the interests of security, we recommended that you change the
passphrase periodically. If the network settings are initialized, it
returns to the initial passphrase.

s

You can enter up to 32 characters on the Configuration menu.
When entering more than 32 characters, use your Web browser
to enter the text.

s

In Quick mode, the initial passphrase is set.

Type  of  security

When  the  Wireless  LAN  unit  is  installed  and  you  are  using  Advanced,  it  is
strongly  recommended  that  you  set  security.

WPA  is  an  encryption  standard  that  improves  the  security  for  wireless
networks.  The  projector  supports  TKIP  and  AES  encryption  methods.

WPA  also  includes  user  authentication  functions.  WPA  authentication
provides  two  methods:  using  an  authentication  server,  or  authenticating
between  a  computer  and  an  access  point  without  using  a  server.  This
projector  supports  the  latter  method,  without  a  server.

a

For  setting  details,  follow  the  directions  from  the  network
administrator  of  your  network.

Submenu

Function

IP Settings

You can make settings related to the following addresses.
DHCP

: Set to On to configure the network using DHCP. If this

is set to On, you cannot set any more addresses.
IP Address

: You can input the IP address assigned to the

projector. You can input a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask

: You can input the subnet mask for the projector.

You can input a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address

: You can input the IP address for the gateway

for the projector. You can input a number from 0 to 255 in each
field of the address. However, the following gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)