Epson EMP-53 사용자 설명서

다운로드
페이지 98
74
Maintenance
This section describes maintenance tasks such as cleaning the projector and 
replacing consumable parts.
Cleaning
You should clean the projector if it becomes dirty or if the quality of 
projected images starts to deteriorate.
Clean the projector case by wiping it gently with a soft cloth.
If the projector is particularly dirty, moisten the cloth with water 
containing a small amount of neutral detergent, and then firmly wring the 
cloth dry before using it to wipe the projector case. Then wipe the case 
again with a soft, dry cloth.
Use a commercially-available air blower, or use a lens cleaning paper to 
gently wipe the lens.
If the air filter becomes clogged with dust, it can cause overheating and 
damage the projector.
Turn the projector upside down and use a vacuum cleaner to remove the 
dust from the air filter.
Cleaning the Projector Case
CAUTION
Be sure to read the separate Safety Instructions/World-Wide Warranty 
Terms before cleaning.
CAUTION
Do not use volatile substances such as wax, alcohol or thinner to 
clean the projector case. These can cause the case to warp and make 
the coating finish peel off.
Cleaning the Lens
Cleaning the Air Filter
CAUTION
Do not rub the lens with harsh materials or subject the lens to shocks, 
as it can easily become damaged.
TIP
• If the air filter is difficult to clean or if it is broken, it should be 
replaced. Contact your dealer for a spare air filter.
• Spare lamps are provided with a spare air filter. The air filter should 
also be replaced when the lamp is replaced.