Epson EMP-53 사용자 설명서

다운로드
페이지 98
85
Glossary
Following is an explanation of some of the terms used in this guide which may be unfamiliar or which were not explained in the text of this guide itself. Further 
information can be obtained by referring to other commercially-available publications.
5BNC
A port used to input analogue video signals.
Aspect ratio
The ratio between an image's length and its height. HDTV images have an aspect ratio of 16:9 and appear elongated. The 
aspect ratio for standard images is 4:3.
Colour temperature
The temperature of an object which is emitting light. If the colour temperature is high, the colours tend to take on a bluish 
tinge. If the colour temperature is lower, the colours tend to take on a reddish tinge.
Component video
Video signals which have the video brightness signals and colour signals separated, in order to provide better image quality. 
In high-definition TV (HDTV), it refers to images which consist of three independent signals: Y (luminance signal), and Pb 
and Pr (colour difference signals).
Composite video
Video signals which have the video brightness signals and colour signals mixed together. The type of signals commonly used 
by household video equipment (NTSC, PAL and SECAM formats). 
The carrier signal Y (luminance signal) and chroma (colour) signal which are contained in the colour bar are overlapped to 
form a single signal.
Contrast
The relative brightness of the light and dark areas of an image can be increased or decreased in order to make text and 
graphics stand out more clearly, or to make them appear softer. Adjusting this particular property of an image is called 
"contrast adjustment".
Cool-down
This is the process by which the projector's lamp is cooled down after it has become hot through use. It is carried out 
automatically when the [Power] button on either the projector's control panel or the remote control has been pressed to turn 
off the projector. Do not disconnect the power cable while cool-down is in progress, otherwise the cool-down process will not 
work properly. If the cool-down period is not allowed to finish normally, the projector's lamp and internal components will 
remain at high temperatures, and this may shorten the operating life of the lamp or cause problems with the operation of the 
projector.
Dolby Digital
A sound format developed by Dolby Laboratories. Normal stereo is a 2-channel format which uses two speakers. Dolby 
Digital is a 6-channel (5.1-channel) system which adds to this a centre speaker two rear speakers and a sub-woofer.
EMP Link21L
A utility software program that allows the projector to be connected to a computer so that the computer can be used to control 
the projector. For details on acquiring the software and for instructions on using the software and compatible projector 
models, please visit the Web site 
HDTV
An abbreviation for High-Definition Television. It refers to high-definition systems which satisfy the following conditions.
•Vertical resolution of 750p or 1125i or greater (p = 
, i = 
•Screen 
 of 16:9
 audio reception and playback (or output)
Interlaced scanning
A method of image scanning whereby the image data is divided into fine horizontal lines which are displayed in sequence 
starting from left to right and then from the top to the bottom of the screen. The even-numbered lines and odd-numbered lines 
are displayed alternately.