Epson EMP-53 사용자 설명서

List of ESC/VP21 Commands

USB Connection Setup

In order to control the projector using ESC/VP21 commands via a USB
connection, the following preparations must be carried out.

PROCEDURE

Download the

EMP Link21L

utility software from the

EPSON web site to the computer being used.

For details on acquiring the software, please visit the Web site

http://www.epson.co.uk/support/download/projector.htm

The USB driver (USB-Com Driver) will be downloaded
together with the utility software, so install this USB
driver into the computer that is to be used.

Refer to the EMP Link21L User's Guide that is downloaded
together with the utility software for instructions on installing
the USB driver.

Change the "COM Port" setting in the "Advanced"
menu to "USB".

Turn off the power for the projector.

After the

cool-down

period has finished, turn the

projector's power back on.

Once the projector's power has turned back on, communication
via a USB Connection will then be possible.