Epson ELPLP29 사용자 설명서
46
Troubleshooting > When You Suspect a Problem
When the indicators provide no help
• No images appear (Nothing is displayed)
• No images appear (Messages are displayed 1)
• No images appear (Messages are displayed 2)
• Vertical stripes appear in the image
• Image is distorted / Image contains interference
• Only part of the image is displayed (large/small)
• Image colours are poor, tinted green or tinted red/purple
• Image is dark
• No sound can be heard
f
No images appear (Nothing is displayed)
• Was the power turned off and then straight
back on again?
After the power has been switched off and the projector is in cool-down
mode, the [Power] button will not work.
mode, the [Power] button will not work.
• Has a Sleep Mode interval (5, 10 or 30
minutes) been set ?
When a Sleep Mode interval has been set, the lamp cuts out after no
operations have been carried out for the set time (5, 10 or 30 minutes).
The power indicator lights orange at this time. ([Menu] button
operations have been carried out for the set time (5, 10 or 30 minutes).
The power indicator lights orange at this time. ([Menu] button
→ "Setting"
• Has the image brightness been adjusted
correctly? ([Menu] button
→ "Image" →
"Picture Quality"
→ "Brightness")
• Is the projected image completely black?
Some images being displayed, including some screen savers, may be
completely black.
completely black.
• Is A/V Mute activated?
• Have you pressed the [Power] button?
• Try resetting all of the current settings.
• Is an image signal being input?
Check if a picture signal is being input.
Set the "Message" option to "ON" in the "Setting"
Set the "Message" option to "ON" in the "Setting"
→
"Display"
→
"Message" configuration menu, in order to view the picture signal
information.
information.