Epson 62c/82c 사용자 설명서

다운로드
페이지 113
Setting Up the Projector
17
Try to place the projector directly in front of the center of the screen, 
facing it toward the screen squarely. If the projector isn’t positioned 
this way, the image will be “keystone” shaped, instead of square or 
rectangular.
If you place the projector below the level of the screen, you’ll have to 
tilt it up by extending the front adjustable foot, as described on 
page 38. This also causes the image to lose its rectangular shape, but 
the Auto Keystone feature corrects the distortion automatically. If the 
image does not regain its rectangular shape, the tilt angle is greater 
than 30° or the Auto Keystone feature may have been disabled. To 
turn it on, see page 61. To adjust it manually, see page 39. 
Other Installations
You can also project from behind the screen or from the ceiling, with 
the projector mounted upside-down: 
To project from overhead, you’ll need the optional ceiling mount 
hardware. (See page 13 for ordering information.) You’ll also need to 
select 
Front/Ceiling
 or 
Rear/Ceiling
 for the Projection option in the 
Extended menu. To project from the rear, select 
Rear
more information.
note
The Auto Keystone feature 
corrects vertical distortion 
automatically. For more 
information, see page 39.
Front/ceiling projection
Rear projection (using a 
translucent screen)
Rear/ceiling projection (using 
a translucent screen)