Epson 62c/82c 사용자 설명서

■

To manually adjust the keystone correction value, press the 

 or 

 buttons on the projector to correct the shape of 

the image. After correction, your image will be slightly 
smaller.

You can also make keystone adjustments using the projector’s Settings 
menu. See page 61.

The brightness of an image depends on the source you are projecting 
and the amount of light in the room. If the image is too bright or not 
bright enough, here are two ways you can adjust it:

■

Change the 

Brightness

 setting in the Image menu. See page 56.

■

Select 

Low

 or 

High

 for the 

Brightness Control

 option in the 

Settings menu. (See page 61.) Low brightness mode extends the 
life of the lamp and decreases the fan noise.

If you’ve connected a computer and the image doesn’t look right, or it 
doesn’t fit properly on the screen, press the 

Auto

 button on the 

remote control. This automatically resets the projector’s tracking, 
sync, resolution, and position settings. You must be projecting a 
computer image for this button to have any effect. Additionally, if the 

Auto Setup

 option in the Signal menu is set to 

OFF

, the Auto 

function will not work. See page 59.

Menu button

ESC button

Enter button

Arrow buttons