Epson Z8000WUNL 사용자 설명서
ESC/VP21 Commands
146
ESC/VP21 Commands
Command List
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error
message is output and a ":" is returned.
message is output and a ":" is returned.
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
transmit.
Item
Command
Power ON/OFF
On
PWR ON
Off
PWR OFF
Signal selection
Computer
Auto
SOURCE 1F
RGB
SOURCE 11
Component
SOURCE 14
BNC
Auto
SOURCE BF
RGB
SOURCE B1
Component
SOURCE B4
HDMI
SOURCE A0
DVI-D
SOURCE 30
Video
SOURCE 45
S-Video
SOURCE 42
Shutter On/Off
On
MUTE ON
Off
MUTE OFF