Epson Z8000WUNL 사용자 설명서
Part Names and Functions
15
Rear
14 LAN port (PowerLite
Pro Z8050WNL only)
Connects to a LAN cable and then to a network.
Name
Function
1
Air exhaust vent
(Lamp cover)
(Lamp cover)
Exhaust vent for air used to cool the projector
internally. Also, open this cover to replace the
projector's lamps.
internally. Also, open this cover to replace the
projector's lamps.
Warning:
Do not place objects that may become warped or
otherwise affected by heat near the Air exhaust vent
and do not put your face or hands near the vent while
projection is in progress.
otherwise affected by heat near the Air exhaust vent
and do not put your face or hands near the vent while
projection is in progress.
Name
Function
2
Rear foot
When set up on a desk, turn to extend and retract
to adjust the horizontal tilt.
to adjust the horizontal tilt.
The rear adjustable feet can be removed when the
projector is installed on a ceiling.
projector is installed on a ceiling.
3
Lamp cover open
tab
tab
Use these tabs to open the lamp cover.
4
Remote Receiver
Receives signals from the remote control.
5
Status indicators
The color of the indicators and whether they are
flashing or lit indicate the status of the projector.
The illustration shows the PowerLite Pro
Z8050WNL. The PowerLite Pro Z8000WUNL does
not have a wireless indicator.
flashing or lit indicate the status of the projector.
The illustration shows the PowerLite Pro
Z8050WNL. The PowerLite Pro Z8000WUNL does
not have a wireless indicator.
6
[</
][>/
] button
Corrects horizontal Keystone distortion. If pressed
while the configuration menu or a Help screen is
displayed, these buttons only have the [
while the configuration menu or a Help screen is
displayed, these buttons only have the [
] and
[
] functions which select menu items and
setting values.
7
[Shutter] button
Press this button to open or close the electric
shutter. You can close the electric shutter to
completely block a projection.
shutter. You can close the electric shutter to
completely block a projection.
8
[Esc] button
Stops the current function.
If pressed when the configuration menu is
displayed, it moves to the previous menu level.
displayed, it moves to the previous menu level.
9
[w/
][v/
]
button
Corrects vertical Keystone distortion. If pressed
while the configuration menu or a Help screen is
displayed, these buttons only have the [
while the configuration menu or a Help screen is
displayed, these buttons only have the [
] and
[
] functions which select menu items and
setting values.
Name
Function