Epson 821 사용자 설명서
32
Turning the Projector On
Turning the Power On and Projecting Images
PROCEDURE
Check that the Power indicator has stopped flashing
and is lit orange.
and is lit orange.
Turn on the power for all equipment connected to the
projector.
projector.
For a video source, press the [Play] button at the video source to
start playback if necessary.
start playback if necessary.
Press the [Power] button on either the projector's
control panel or the remote control to turn on the
power for the projector.
control panel or the remote control to turn on the
power for the projector.
A beep will sound to indicate that the projector is starting up.
The Power indicator starts to flash green as the projector warms
up, and an image begins to appear.
The Power indicator starts to flash green as the projector warms
up, and an image begins to appear.
TIP
The Password Protect setting may cause the password entry screen to
be displayed each time the power is turned on.
If this happens, enter the password. s
be displayed each time the power is turned on.
If this happens, enter the password. s
1
Lit orange
2
3
Remote control
Changes from flashing to lit green
TIP
• If the Power indicator is flashing green, operation of the [Power]
buttons is disabled.
• Depending on the settings, the message "No Signal." may appear.
• If the "Setting" - "Operation Lock" menu setting is set to "ON",
none of the buttons on the projector's control panel will work except
for the [Power] button. s
for the [Power] button. s
Use the remote control buttons at such times.