Acer PW730 사용자 설명서

... English

Installation

Powering On/Off the Projector

Power

Powering On the Projector

1. Open the lens cap.
2. Ensure that the power cord and signal cable are securely

connected. The Power LED will flash amber.

3. Turn on the lamp by pressing “Power” button on the control

panel  and the Power LED will turn amber.

4. Turn on your source (computer, notebook, video player

,etc.). The projector will detect your source automatically.



If the screen displays ”Lock” & ”Source” icons, it means the pro-

jector locks on this source type and there is no such type of input

signal found.



If the screen displays “No Signal”, please make sure the signal

cables are securely connected.



If you connect multiple sources at the same time, using the

“Source” button on the remote control or control panel to switch.



Turn on the

projector first and

then the signal

sources.



The lens cap must

be opened then

turn on the projec-

tor.

If the projection lens cap is not opened when a projector is powered

on, users will hear a continuous beep sound, and the interval of each

beep warning message is about 3 seconds.

The projector will not be turned on and automatically go to stand-by

mode if the lens cap is still closed after beep sound keeps warning for

5 times.

If the projection lens cap is accidentally closed while the projector is

running, users will hear the same beep sound and the projector will

automatically go to stand-by mode if the lens cap is still not opened

after 5 times of warning sound.