Acer PW730 사용자 설명서

English ...

The projector will detect the lamp life itself. It will show you a 

warning message “Lamp is approaching the end of its useful 

life in full power operation. Replacement Suggested!” When 

you see this message, changing the lamp as soon as possible.

Make sure the projector has been cooled down for at least 30

minutes before changing the lamp. 

Warning: Lamp 
compartment is 

hot!  Allow it to 

cool down before 

changing lamp!

Warning: To 

reduce the risk of 

personal injury, do

not drop the lamp 

module or touch 

the lamp bulb. The 

bulb may shatter 

and cause injury if 

it is dropped.

 

1

3

4

 

2

1.  Turn the power off the projector by pressing the Power button.
2.  Allow the projector to cool down at least 30 minutes.
3.  Disconnect the power cord.
4.  Remove the cover.



5.  Push up and remove the cover. 



6.  Remove the 3 screws from the lamp module.



7. Pull out the lamp module.

