Hitachi CP-X268AWF 사용자 설명서

49

,QSXWDSDUW3,1&RGHXVLQJWKHŸźŻŹ

/RGB and INPUT buttons.

A CONFIRMATION BOX will appear. Reenter the 
same PIN Code. This will complete the PIN Code 
registration.
NOTE: If there is no key input for about 55 seconds 
while the PIN BOX or the CONFIRMATION BOX are 
displayed the menu will close. If necessary repeat 
the process from 3.1-1.
Afterwards, anytime the projector is restarted after 
the power switch is turned off the PIN BOX will be 
displayed. Enter the registered PIN Code.
The projector can be used after entering the 
registered PIN Code. If an incorrect PIN Code is 
input the PIN BOX will be displayed again.
If an incorrect PIN Code is input 3 times the projector will turn off. Afterwards 
the projector will turn off every time an incorrect PIN Code is input. The 
projector will also turn off if there is no key input for about 5 minutes while 
the PIN BOX is displayed.
This function will activate only when the projector is started after the power 
switch was turned off.

NOTE : Please do not forget your PIN Code.

3.2-1 Follow the procedure in 3.1-1 to display the PIN LOCK on/off menu. 

8VHWKHŸźEXWWRQVWRVHOHFW78512))DQGWKH3,1%2;ZLOOEH
displayed.

Enter the registered PIN Code to turn the PIN LOCK function off.
If an incorrect PASSWORD is entered the  menu will close.

3.3-1 While the PIN BOX is displayed, press and 

hold the RESET button for three seconds or 
SUHVVDQGKROGWKH,1387DQGŹEXWWRQVIRU
three seconds. The 10 digit Inquiring Code will 
be displayed. 

NOTE: If there is no key input for about 5 minutes 
while the Inquiring Code is displayed the projector 
will turn off.

3.3-2 Contact your dealer with the 10 digit Inquiring Code. Your PASSWORD 

ZLOOEHVHQWDIWHU\RXUXVHUUHJLVWUDWLRQLQIRUPDWLRQLVFRQ¿UPHG

OPTION Menu

PIN BOX

2+0$1:

4)$

+PRWV2+0%QFG

CONFIRMATION BOX

(PIN BOX)

2+0$1:

4)$

%QPHKTOCVKQP

2+0$1:

+PSWKTKPI%QFG

Inquiring Code 

(PIN Code)