Hitachi CP-X3021WN 사용자 설명서

19

1.

Make sure that the power cord is  rmly and 
correctly connected to the projector and the 
outlet.

Turning on the power

2.

Make sure that the POWER indicator is 
steady orange (

100). Then remove the 

lens cover.

3.

Press STANDBY/ON button on the 
projector or the remote control.
The projection lamp will light up and POWER 
indicator will begin blinking in green. When the 
power is completely on, the indicator will stop blinking and light in steady 
green (

100).

Power on/off

To display the picture, select an input signal according to the section Selecting an 
input signal

 (

22).

Power on/off

VIDEO

DOC.CAMERA

KEYSTONE

ASPECT

SEARCH

BLANK

MUTE

MY BUTTON

POSITION

ESC

MENU

RESET

COMPUTER MY SOURCE/

AUTO

MAGNIFY

PAGE

DOWN

ON

OFF

FREEZE

UP

࡯

㧗

VOLUME

1

2

ENTER

 button

 indicator

The INITIAL SETTING Menu will be displayed by factory default upon startup. 
Once the INITIAL SETTING Menu is set, it will not appear until FACTORY RESET 
(

62) is executed. If you wish to change the settings, refer to the LANGUAGE 

(

47) and ALTITUDE ( 57) menu. 

(1)  LANGUAGE: Use the ▲/▼/◄/► 

buttons to select the desired language 
and press the ENTER button of the 
remote control or the INPUT button of 
the projector to execute.

(2)  ALTITUDE: Use the ▲/▼ buttons to 

select NORMAL for altitude below 
1600 m (5250 feet), otherwise select 
HIGH and press the ENTER button of 
the remote control or the INPUT button 
of the projector to execute.