Infocus IN3106 사용자 설명서
36
4
Loosen the captive screws that attach the lamp housing to the projector.
Carefully remove the lamp housing. Dispose of the lamp in an
environmentally proper manner.
Carefully remove the lamp housing. Dispose of the lamp in an
environmentally proper manner.
5
Install the new lamp module and tighten the screws.
6
Replace the lamp door by sliding it into place.
7
Plug in the power cord and press the Power button to turn the projector
back on.
back on.
8
To reset the lamp hour timer, navigate to the Status and Service menu and
select Reset Lamp Hours (page 33).
select Reset Lamp Hours (page 33).
loosen screw