Kensington MT1065 사용자 설명서

AUDIO OUT

L

AUDIO IN

L

R

R

Component

Y

Cb

Cr

RGB 1 IN

RGB 2 IN

You can connect your projector to a DVD player with component output
or Video output. To do so, simply:

1. Turn off the power to your projector and DVD player.

2. If your DVD player has the component video (Y,Cb,Cr) output, use a

commercially available component video cable (RCAX3) and the op-
tional 15-pin-to-RCA (female)

⳯3 cable to connect your DVD player

to the RGB IN1 or IN2 connector on the projector.

Component video RCA

⳯3 cable

(not supplied)

For a DVD player without component video (Y,Cb,Cr) output, use com-
mon RCA cables (not provided) to connect a composite VIDEO out-
put of the DVD player to the Video Input of the projector.

3. Turn on the projector and DVD player.

NOTE: Refer to your DVD player's owner's manual for more information about
your DVD player's video output requirements,

Optional 15-pin-to-RCA
(female)

⳯3 cable (ADP-CV1)

Audio cable
(not supplied)

Audio Equipment

RCA(female)-to-BNC(male)
adapter (not supplied)