Canon LV-7285 사용자 설명서

BLANK

MENU

POWER

INPUT

IMAGE

ASPECT

INFO.

AUTO PC

3. Projecting an Image (Basic Operation)

This section describes how to turn on the projector and to project a picture onto the screen.

 Turning on the Projector

NOTE:
• The projector has two power switches: a main power switch and a POWER (

) button.

• When plugging in or unplugging the supplied power cord, make sure that the main power switch is pushed to the off () po-

sition. Failure to do so may cause damage to the projector.

1. To turn on the main power to the projector, press the

Main Power switch to the on position ( I ).

• The projector will go into standby mode. When in

standby mode, the POWER indicator will light orange
and the STATUS indicator will light green to show that
[Normal] mode is selected for [Standby mode].

3. Press the POWER (

) button on the projector cabi-

net or the POWER (

) button on the remote control

for about 1 second.

The STATUS indicator goes off and the POWER indica-
tor starts blinking.

When the POWER indicator turns a steady green, and
the projector is ready to use.

Less than 4 seconds* after turning on the power, the
projector is ready to display PC or video images (Quick
Start).The quick start time is only when [Standby mode]
is set to [Normal] in the on-screen message.

If the projector is turned off and is turned it back on
quickly, it may take some time to start displaying an im-
age. This is because the fans run for cooling purpose.

TIP: When the STATUS indicator lights orange, it means that

the [Key lock] is turned on. See page

• When the message "Projector is locked! Enter your password."

is displayed, it means that the [Password] is turned on. See
page

After you turn on your projector, ensure that the com-
puter or video source is turned on and that your lens
cover is removed.

Standby

Preparing to

power on

Power On

Steady orange
light

Blinking

green light

Steady

green light

See page

for more details.

2. Remove the lens cover.