Canon LV-7285 사용자 설명서
64
5. Using On-Screen Menu
Selecting Signal Format [Input signal select]
[Computer 1], [Computer 2 (Analog)]
[Computer 1], [Computer 2 (Analog)]
Allows you to choose [Computer 1] or [Computer 2 (Analog)] for an RGB source such as a computer, or [COM-
PONENT] for a component video source such as a DVD player. Normally select [RGB/COMPONENT] and the
projector automatically detects a component signal. However there may be some component signals that the
projector is unable to detect. If this is the case, select [COMPONENT].
PONENT] for a component video source such as a DVD player. Normally select [RGB/COMPONENT] and the
projector automatically detects a component signal. However there may be some component signals that the
projector is unable to detect. If this is the case, select [COMPONENT].
[VIDEO & S-VIDEO System Select]
This feature enables you to select composite video standards automatically or manually.
Normally select [Auto] and the projector will automatically detect the video standard.
In the case where the projector has difficulty detecting the video standard, select the appropriate video stan-
dard from the menu.
This must be done for VIDEO and S-VIDEO respectively.
Normally select [Auto] and the projector will automatically detect the video standard.
In the case where the projector has difficulty detecting the video standard, select the appropriate video stan-
dard from the menu.
This must be done for VIDEO and S-VIDEO respectively.
Enabling or Disabling WXGA Mode [WXGA mode]
Selecting [On] will give priority to a WXGA (1280 x 768) signal in recognizing an input signal.
When [WXGA mode] is set to [On], an XGA (1024 x 768) signal may not be recognized on LV-7385, LV-7380, LV-
7285 or LV-7280. In this case, select [Off].
Selecting [On] will give priority to a WXGA (1280 x 768) signal in recognizing an input signal.
When [WXGA mode] is set to [On], an XGA (1024 x 768) signal may not be recognized on LV-7385, LV-7380, LV-
7285 or LV-7280. In this case, select [Off].
Enabling the deinterlace [Progressive]
Turns on or off the deinterlace function for a telecine signal.
Turns on or off the deinterlace function for a telecine signal.
Off ......................... Select this option if there is any jitter or artifacts in video.
On .......................... Default standard setting.
On .......................... Default standard setting.
NOTE: This feature is not available for RGB and HDTV signals.
Enabling Key Sound and Error Sound [Beep]
This feature turns on or off the keypad sound or alarm when a button on the cabinet and the remote control is
pressed or an error occurs.
This feature turns on or off the keypad sound or alarm when a button on the cabinet and the remote control is
pressed or an error occurs.
NOTE: The [Beep] sound volume cannot be adjusted. The [Beep] sound cannot be muted by using the BLANK button. To turn off
the [Beep] sound, select [Off] for [Beep].
[Options (2)]
Setting Off Timer [Off timer]
You can use the Off Timer feature to turn off the projector (standby mode) automatically at a preset time.
Eight preset times can be selected: Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00 and 16:00.
The remaining count-down time will be shown at the top right of the menu when the [Off timer] is preset.
The POWER indicator blinks green in cycle of 2.5 seconds on and 0.5 second off when [Off timer] is preset.
When the off timer remaining time reaches 3 minutes, a message will be displayed to that effect.
You can use the Off Timer feature to turn off the projector (standby mode) automatically at a preset time.
Eight preset times can be selected: Off, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00 and 16:00.
The remaining count-down time will be shown at the top right of the menu when the [Off timer] is preset.
The POWER indicator blinks green in cycle of 2.5 seconds on and 0.5 second off when [Off timer] is preset.
When the off timer remaining time reaches 3 minutes, a message will be displayed to that effect.
Selecting Power-saving in [Standby mode]
The projector has two standby modes: [Normal] and [Power-saving].
The projector has two standby modes: [Normal] and [Power-saving].