Sony STRDN1020 사용자 설명서

D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STR-
DN1020-CEL.fm

STR-DN1020

4-273-051-14(1)

Adjust the direction of the AM loop antenna 
(aerial) for optimum reception upon tuning to 
an AM station.

“– – – .– – MHz” appears and then the screen 
returns to the current frequency.
Make sure you have entered the right 
frequency. If not, repeat step 2. If you still 
cannot tune to a station, the frequency may not 
be in use in your area.

You can change the AM tuning scale to either 
9 kHz or 10 kHz using the buttons on the 
receiver.

Press ?/1 to turn off the 
receiver.

While holding down TUNING 
MODE, press ?/1 on the 
receiver.

The current AM tuning scale is changed 
to 9 kHz (or 10 kHz).
To reset the scale to 10 kHz (or 9 kHz), 
repeat the procedure above.

• Depending on the settings, the receiver may take 

some time to change the AM tuning scale.

• All preset stations will be erased when you change 

the tuning scale.

 

You can store up to 30 FM and 30 AM stations 
as your favorite stations. 

Tune to the station that you 
want to preset using Auto 
Tuning (page 55) or Direct 
Tuning (page 55).

The option menu appears.

b.

The station is stored as the selected preset 
number. 

You can store station as follows:
• AM band: AM 1 to AM 30
• FM band: FM 1 to FM 30

?/1

TUNING MODE

V/v/B/b,  

TOOLS/
OPTIONS