Sony STRDN1020 사용자 설명서

다운로드
페이지 132
94
GB
D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB05ENJ_STR-
DN1020-CEL.fm
masterpage: Left
STR-DN1020
4-273-051-14(1)
When a test tone is not output 
from the speakers
• The speaker cords may not be connected 
securely. Check to see if they are connected 
securely and cannot be disconnected by 
pulling on them slightly.
• The speaker cords may have short-circuit 
problem.
• Make sure that you are not using PARTY 
When a test tone is output from 
a different speaker than the 
speaker displayed on the TV 
screen
The speaker pattern set up is incorrect. Make 
sure that the speaker connections and the 
speaker pattern match correctly.
D.Range Comp (Dynamic range 
compression)
Lets you compress the dynamic range of the 
soundtrack. This may be useful when you want 
to watch movies at low volumes late at night. 
Dynamic range compression is possible with 
Dolby Digital sources only.
• MAX: The dynamic range is compressed 
dramatically.
• STD: The dynamic range is compressed as 
intended by the recording engineer.
• AUTO: The dynamic range is compressed 
automatically.
• OFF: The dynamic range is not compressed.
Tips
• Dynamic range compressor lets you compress the 
dynamic range of the soundtrack based on the 
dynamic range information included in the Dolby 
Digital signal.
• “STD” is the standard setting, and enacts light 
compression. Therefore, we recommend using the 
“MAX” setting. This greatly compresses the 
dynamic range and lets you view movies late at 
night at low volumes. Unlike analog limiters, the 
levels are predetermined and provide a very natural 
compression.
Distance Unit
Lets you select the unit of measurement for 
setting distances.
• FEET: The distance is displayed in feet.
• METER: The distance is displayed in 
meters.
Surround Settings menu
You can select the sound field and adjust the 
effect level, etc. on the “Sound Field Setup” 
screen.
For details on the sound field, see “Enjoying 
Surround Sound” (page 64).
Note
The setup items you can adjust on each menu vary 
depending on the sound field.
To adjust the effect level for 
 
HD-D.C.S.
1
Select “HD-D.C.S.”, then press 
 or 
b.
2
Select the effect type you want, then 
press .
HD-D.C.S. has three different types: 
Theater, Dynamic and Studio. Each type 
has different reflection and reverberation 
sound mixture levels and is optimized to 
match a listener’s room uniqueness, taste 
and mood.
• Dynamic: Want to enjoy the sound 
effects to the full extent, just like at the 
movie theaters? 
 
Dynamic type emphasizes on the 
reflection sound. Without HD-D.C.S., 
many rooms are often somewhat 
reverberant but lack a spacious feeling. 
 
This type acoustically opens up those 
types of rooms and provides a spacious 
and dynamism feeling equivalent to a 
mastering studio.