SMART Technologies SRS-LYNC-S 사용자 설명서
S M A R T R O O M S Y S T E M F O R M I C R O S O F T L Y N C
Software configuration guide
3
1022893 Rev 02
Task
A USB mouse and keyboard are connected to the Lync appliance for use during the software
configuration.
configuration.
Starting your room system for the first time
Starting your room system
The procedure for starting your room system depends on the room size.
Room size
Procedure
Extra small room
Small room
Medium room
Medium room with dual panels
Large room
To start your extra small room system
1. Flick the power switch on the bottom of the interactive flat panel.
2. Press the Input Select button
on the interactive flat panel’s
front control panel until the input source is HDMI1.
The Lync appliance begins the first-run installation process. During this process, the Lync
appliance restarts several times.
N O T E
This process takes time to complete. During this process, displays might not change content
or might appear blank for several minutes.
3. Press MENU on the interactive flat panel’s remote control.
4. Press the down arrow until you select the SETUP menu, and then press SET.