Toshiba B-SX5T 사용자 설명서

EO10-33013B 

(Revision Date: Apr. 24, 2008) 

3.11 Wireless LAN Board: B-9700-WLAN-QM-R 

3- 8 

 

„ Country code 

 

As available frequency bands are different from country to country, be sure to set a country code 
before installing a wireless LAN module in a user’s printer.  Also, ask an end user to confirm a 
country code.  Use of a wireless LAN module with a wrong country code could violate each 
country’s Laws and Regulations for Radio Equipment, and violators could be subject to penalties.  

 

The country code cannot be changed through the Web browser, but TELNET.  

 
 

<How to set a country code using TELNET> 

 
 

(1)  Disconnect the LAN cable connected to the printer, connect the printer to a host PC with a 

straight LAN cable via a relay connector.   

 

 

When using a hub in place of a relay connector, use a cross cable or  

 

(2)  Open the MS-DOS prompt, type in “telnet 192.168.10.21” (default IP address).  

 

(3)  Enter a password, “tecbcp”, to log in.  

 

(4)  From the top menu, change a country code using the following command. 

 

=>ctryXX (XX=new country code.  See Country Code Table.) 

 

(5)  The new country code will become effective by turning the printer off and on again. 

 

(6)  A country code can be checked by typing “=>ctry” on the telnet console.  

 
 

Country 

code 

Country name 

Country 

code 

Country name

Country 

code 

Country name 

US U.S.A./Canada GR 

Greece 

IE 

Ireland 

FR France SE Sweden GB  U.K. 

PT Portugal HU Hungary AU Australia 

NO Norway BE Belgium  FI  Finland 

DE Germany  IT 

Italy 

LU 

Luxembourg 

ES Spain NL 

Netherlands 

CH 

Switzerland 

IS Iceland LI 

Liechtenstein 

NZ 

New 

Zealand 

AT Austria DK 

Denmark   

 

 
 

„ MAC address 

MAC address of the Wireless LAN module will be necessary when setting the MAC address filtering 
function of an access point.  As it is printed on the top of the wired LAN connector on the Wireless 
LAN Board, write down it on Installation Manual before mounting the covers so that an end user can 
know the MAC address.   

 

 

MAC Address

12-digit code printed on the right side 
of “W” is MAC address.