Toshiba CB-416-T3-QQ 사용자 설명서
Appendix 5 System Mode
101
Notes:
•
When pressing the FEED and
RESTART keys at the same time
in the Test Print menu, the message
returns to “<3> TEST PRINT”.
RESTART keys at the same time
in the Test Print menu, the message
returns to “<3> TEST PRINT”.
•
If holding the FEED or
RESTART key for 0.5 seconds or
longer in the Test Print menu, the
key is entered continuously.
RESTART key for 0.5 seconds or
longer in the Test Print menu, the
key is entered continuously.
•
The fine adjustment parameters are
effective for the test print.
effective for the test print.
•
If any error occurs, an error
message appears, and the printer
stops printing. After clearing the
error, press the PAUSE key to
return to the System Mode menu.
The printer does not restart
printing automatically.
message appears, and the printer
stops printing. After clearing the
error, press the PAUSE key to
return to the System Mode menu.
The printer does not restart
printing automatically.
•
A changed parameter becomes
enabled by pressing the PAUSE
key and is stored in memory until
the printer is turned off.
enabled by pressing the PAUSE
key and is stored in memory until
the printer is turned off.
The Test Print menu contains the following:
•
Prints the parameter settings and slant line.
•
Prints the color band patterns.
•
Prints the characters and bar codes.
•
Performs the automatic print out for the assembly process.
(Transmissive/Reflective Sensor)
(Transmissive/Reflective Sensor)
While pressing the FEED and PAUSE keys at the same time,
turn on the printer. Hold both keys until the “<1> DIAG.” message
appears. Then press the FEED key twice.
turn on the printer. Hold both keys until the “<1> DIAG.” message
appears. Then press the FEED key twice.
The Test Print is ready to be performed. Press the PAUSE key.
Specifying the Print Condition for the Test Print
The print condition for the Test Print should be specified before printing.
The print condition for the Test Print should be specified before printing.
Press the PAUSE key. “ISSUE COUNT” appears. Press the
PAUSE key again.
PAUSE key again.
The number of copies can be selected, with a maximum of 5000
After entering the value, press the PAUSE key.
After entering the value, press the PAUSE key.
Select the print speed options for the test print: 6 inches/second or
4 inches/second.
After selecting the print speed, press the PAUSE key.
4 inches/second.
After selecting the print speed, press the PAUSE key.
Select the media sensor to be used for the test print: “TRANS”
(Transmissive Sensor), “REFLECT.” (Reflective Sensor) or
NONE.
After selecting the media sensor, press the PAUSE key.
(Transmissive Sensor), “REFLECT.” (Reflective Sensor) or
NONE.
After selecting the media sensor, press the PAUSE key.
<1>DIAG. V1.0
<3>TEST PRINT
Note:
Use the FEED or RESTART key
to select a desired value or option.
to select a desired value or option.
Note:
When the Transmissive Sensor is
selected, the gap between labels
should be 2 mm.
selected, the gap between labels
should be 2 mm.
PRINT CONDITION
ISSUE COUNT 1
PRINT SPEED 6"/S
SENSOR TRANS