Tektronix 380 사용자 설명서

The front panel displays messages indicating the condition of the printer.  

Some messages, such as 

Standby

 and 

Warming Up

, simply provide status 

information.  These messages do not require user action.  Error messages, 

such as 

Jam:Open Front Cover

, require you to perform some action such 

as remove a paper jam.  Use the information in the following table to 

determine an appropriate action for each type of message.  

You can learn more detailed information regarding the problem by checking 

the associated seven-digit error code that is stored in the printerÕs 

Service Support/Fault History front panel menu.  Refer to the Phaser 380 

printerÕs web page for more information:

The printer may display a numeric error code when it detects certain types 

of problems.  If you see a numeric error code, Þrst write down the number.  

Try turning off the printerÕs power and wait at least 15 seconds before 

turning the power on again.  If that does not solve the problem, call your 

local Tektronix ofÞce for assistance or call Tektronix Service in the U.S. and 

Canada at 1-800-835-6100.   

Check Print

The printer is waiting for confirmation of the print job 
from the front panel.

Empty Waste 
Liner (A)

The waste liner (A) in the printer’s maintenance 
tray (B) is full.  Open the front cover, remove the 
maintenance tray and empty the blue waste liner.

Incorrect Media Size

The paper fed into the printer was shorter than that 
specified.  

■

Use an approved media size.  

■

Feed the narrow edge of the paper first into the 

manual-feed slot. 

Ink Low/Out of Ink

The 

Ink Low

 message appears when ink level drops 

to one-half stick.  Open the top cover and add the 
appropriate color of ColorStix solid ink stick.