Tektronix 380 사용자 설명서

Use the following guidelines to help prevent paper and transparencies from 

jamming inside the printer.

■

When installing a new maintenance tray, push on both sides of the 

tray to latch it Þrmly into the printer.

■

Periodically clean the printer to keep it operating in peak 

■

Fan the paper or transparency media before loading it into the 

media tray.  For additional information on loading media trays, 

refer to ÒAll about mediaÓ on page 3-28.

■

Use standard grade paper of the appropriate weight; use the 

page 3-32 for more information.

■

Wait until a front panel message prompts you before feeding a 

second sheet of paper or transparency into the manual-feed slot.

■

Keep paper and other supplies clean and free from dust.  Paper 

that has been sitting out of its sealed wrapper can become 

distorted, causing paper jams.  Keep paper sealed until you are 

ready to use it for printing.

■

Do not use paper that has been creased or wrinkled.

After you clear the jammed media, the printer feeds a cleaning page to 

remove a partial image that may be on the printdrum.  Once the printdrum 

is cleared, the printer outputs the original image on a second page.  The 

source of the cleaning page (upper tray is default) is selected through the

 

Cleaning Page Source

 front panel menu selection when a Lower Paper 

Tray Assembly is installed.  If you have letterhead or transparencies in the 

upper tray, you can change the source of the cleaning page to avoid using 

letterhead for the cleaning page.  Refer to ÒSelecting the cleaning page