Tektronix 380 사용자 설명서

You can change or disable Energy Star settings through the front panel (refer 

to ÒFront panel menu mapÓ on page 7-5) or through the World Wide Web 

(refer to the PhaserShare Status Software User Manual.)

 When the printer is idle for more than 4 hours, it goes into a 

standby mode that keeps the printer ready to use yet reduces energy 

consumption.

The printer exits standby mode when you send a Þle to the printer, press any 

front panel button, install or remove a media tray, or open any cover.  For 

example, adding ink causes the printer to exit standby mode.  When the 

printer exits this standby mode, it is ready to print in about 5 minutes.

 When the printer is idle for the time set in the Energy Star 

front panel menu, it cools down completely.  When the printer exits the 

Energy Star mode, it is ready to print in about 20 minutes.

For printers ordered with the Energy Star option, the Energy Star default is 

set to 1 hour.  After an hour of inactivity, the printer begins a cool-down 

cycle that requires a 20 minute warm-up period before being ready to use 

again.  Increasing the Energy Star value from 1 hour keeps the printer ready 

for printing and eliminates the warm-up period.  In the printerÕs standard 

conÞguration, the Energy Star default is set to 120 hours.

Since the printer uses ink during warm-up from a power-off condition and 

when exiting Energy Star mode, you can reduce ink consumption by leaving 

the printer on.  To ensure optimum printing performance and best ink 

economy, leave the printer turned on overnight and during weekends.