Tektronix 380 사용자 설명서

The Þrst time you turn your printer on, it will take about 20 minutes to warm 

up.  The printerÕs front panel displays a percentage value to indicate its 

progress.  The warm-up cycle is complete when the front panel displays 

100%

.

As the printer initializes, you will hear a series of start-up noises that are 

normal and are not an indication of problems with the printer.  During 

warm-up, the printer outputs a cleaning page as part of its initialization.  

The printer is available for printing when it displays 

Ready

 or the printerÕs 

name.

After the printer has warmed up, it automatically prints a Startup Page.  If 

you want to turn off the Startup Page, you can do so through the front panel.  

Refer to ÒFront panel overviewÓ on page 7-1 for instructions on using the 

front panel.  You can also control the Startup Page through a utility Þle 

provided on the printerÕs CD-ROM, or through your World Wide Web 

browser.  Refer to the CD-ROM or the PhaserShare Network Cards and Software 

System Administrator Manual, respectively, for information on utility Þles and 

web browsers.

When you Þrst turn on the printer, the 

and 

indicators on the 

front panel are lighted.  The printer takes about 20 minutes to completely 

warm up.   During the warm-up cycle, the 

 indicator goes out, the 

 indicator ßashes, and the front panel displays a series of ÒWarming 

upÓ messages.