Tektronix 380 사용자 설명서

The Phaser 380 printer driver is a Tektronix-modiÞed version of Apple's 

LaserWriter 7.1.2 printer driver.  Use the Phaser 380 printer driver if you are 

using System Software 6.0.7, or 7.0 and later.   

Install the printerÕs software as described on page 2-47.  Choose 

Easy Install to install all of the necessary software, or select 

Phaser 380 Driver in the Custom Install window.   

Select Chooser from the Apple menu.   

Click on the Phaser 380 printer driver icon on the left side of the 

Chooser.  A list appears with the printers you have connected to 

your Macintosh or printers that are available on a network.  (If the 

printer driver icon does not appear, check the cable connections on 

your computer and printer.)

Click on the Zone your printer is in.  See your network 

administrator if you have questions.  

Click on your Phaser 380 printer in the list of printers on the right 

side of the Chooser.

Close the Chooser by clicking its close box.   

The LaserWriter 8.3.4 driver uses printer-speciÞc PPDs (PostScript Printer 

Description Þles) to learn a printerÕs page sizes, printing options, and media 

type options. To use the LaserWriter 8.3.4 driver with a Phaser 380 printer, 

do the following steps.  If the printer is busy, it may take some time to 

complete this conÞguration procedure; you may want to do this procedure 

when the printer is idle.  You only have to conÞgure a printer once.