Tektronix 380 사용자 설명서

Using the printer drivers provided with your printer, you can select from 

three print quality modes: 

Produces the fastest full-color prints.  This print-quality mode is 

not available for transparency printing.  Transparency prints made with this 

setting are printed using the Standard print-quality mode instead.

The default print-quality setting for full-color printing.  Select this 

print-quality mode for the fastest printing of transparencies. 

Available with the Phaser 380 printerÕs Extended 

Features option.  Used for PANTONE Color matching (set TekColor 

Correction to None).  For paper printing, select this print-quality mode for 

the best text quality and the smoothest color blends. For transparency 

printing, select this print-quality mode to produce transparencies with the 

most vibrant colors, the smoothest color gradations and color sweeps, and 

the highest durability.  

Print speeds listed in the following table are based on the time it takes the 

printer to make a single print.  Printing of Tabloid Maximum-size 

transparency is supported only from the manual feed slot.

ppm is pages per minute

Fast Color

A4/Letter: 3.5 ppm

A3/Tabloid Maximum: 2.0 ppm

A4/Letter: not supported

A3/Tabloid Maximum: not supported

Standard

A4/Letter: 2.5 ppm

A3/Tabloid Maximum: 1.3 ppm

A4/Letter: 1.5 ppm

A3/Tabloid Maximum: manual feed slot

Enhanced (600 x 300)

A4/Letter: 1.2 ppm

A3/Tabloid Maximum: 0.6 ppm

A4/Letter: 0.64 ppm

A3/Tabloid Maximum: manual feed slot