Datamax 7A300007 Rev. 2 사용자 설명서

 

43

 

The Graphic Logo feature allows the storage of a formatted Bitmap file in nonvolatile memory. Up to eight memory sectors, of up 
to 64,000 bytes each, are reserved to store a Graphic Logo in the printer. Upon receipt of a Graphic Logo print command, the 
Graphic Logo

 data is sent to the printer. This feature allows printing of a stored graphic image as part of a receipt. 

The specifications for the logo memory are as follows:  

 

2 inch 

8 (FLASH) 0 ≤ n ≤ 7 

64,000 

1365 

384 

0 - 7 

3 inch 

8 (FLASH) 0 ≤ n ≤ 7 

64,000 

910 

576 

0 - 7 

4 inch 

8 (FLASH) 0 ≤ n ≤ 7 

64,000 

630 

832 

0 - 3 

 

This command places the printer in Flash Logo mode.  
 

Escape Sequence:    ESC  D 

L  CR  LF 

Hexadecimal:  

1B 

44 

4C 

0D 

0A 

Decimal: 

  27 68 76 13 10 

 

Before executing this command, the printer power must be cycled, alternatively the command ESC X X  can be sent. 

The printer responds by sending a  ‘?’ character to the host application indicating that the Flash Logo Mode is enabled. 

ESC L G n CR LF 

This command selects the memory location in which to store the logo. The parameter n can take values between 0 – 7 
(n varies with printer model. Please refer to the above table). 
 

Escape 

Sequence:   ESC L  G  1  CR LF 

Hexadecimal: 

  1B 4C 47 31 0D 0A 

Decimal: 

  27 76 71 49 13 10 

This command terminates the logo uploading process. 

The printer saves the received Logo data in Flash and sends D!X characters to the host, indicating that the logo data 
was saved successfully.  
Escape 

Sequence:   ESC L  G 0xFF CR LF 

Hexadecimal:  

1B 

4C 

47 

0xFF 

0D 

0A 

Decimal: 

  27 76 71 255 13 10 

ESC L g n      

This command prints a logo previously store in memory. The parameter n instructs the printer to print the graphic stored 
in memory locations (refer to table above for logo location availability) 

 

Example 1: The following escape sequence will print the logo at memory location one.