Canon CP200 사용자 설명서

The printer’s indicator lights red 
without the camera’s LCD 
monitor displaying any error 
message.

There is a malfunction in the 
printer.

Remove the paper from the 
paper-handling slot and take up 
any slack in the ink sheet. Turn 
the printer’s power off and turn it 
on again.

Print quality is not good.

You are not using the correct 
paper type.

Use the designated paper type.

Paper is loaded with the wrong 
side up.

Load the paper correctly (glossy 
side up).

The ink sheet or paper is dirty.

Use a clean ink sheet and clean 
paper.

Condensation has formed inside 
the printer.

Wait for condensation to 
evaporate.

Faint stripes appear in the print.

Dust has accumulated inside the 
printer.

Remove the ink cassette and 
insert the cleaner stick in the 
direction of the arrow and with 
the arrow on the cleaner stick 
facing up.
Push it in completely as shown in 
figure A and slide it in and out of 
the printer 2 or 3 times.

Printed images are distorted.

The printer is too close to a TV, 
video game machine, or other 
electromagnetic source.

Move the printer so that it is at 
least one meter (3.3 ft.) away 
from the electromagnetic source.

The printer is too close to a stereo 
speaker, large motor, or other 
strong magnetic source.

Move the printer away from the 
strong magnetic source.

Nothing happens when the 
camera’s SET button is pressed.

The printer has overheated.

Wait for the printer to cool down.

Printing is in progress.

Wait for the printer to finish 
printing.

Frequent paper jams.

The paper cassette is overloaded. Do not load more than 18 sheets 

of paper into the cassette.

The print output receptacle is too 
full.

Do not allow more than 9 sheets 
to accumulate in the receptacle.

Paper is creased or curled.

Do not use paper that is creased 
or curled.

Problem

Cause

Solution

Figure A