Canon BJC-5100 사용자 설명서

Chapter 5

The print job may  

be a finely detailed

If the 

POWER/ERROR

light is slowly flashing, then the 

photograph or 

printer is operating normally. The printer requires more 

illustration

time to process a finely detailed illustration or photograph.

Other programs are

running

Some programs running in the background may take up
resources that cause printing to go slow. Quit all other
programs except the current printing one.

Printer has been 

operating for

Interrupt printing at a convenient point, turn the printer

a long time

off and wait for at least 15 minutes for the printer to cool.

The print heads may occasionally overheat during a long
print job. If the print heads overheat, printing will pause at
the end of a pass across the page to allow time for the print
heads to cool and then will re-start after a brief interval.

C

To avoid minor burns, do not touch the print heads or the surrounding
area.

Print head nozzles in 

one of the BJ cartridges

Check the status of the print heads (see page 4-3). Clean

are clogged or one of

the print heads (see page 4-6). Replace the BJ tanks as

the inks has run out

necessary (see page 4-16).

Protective cap or tape 

have been reattached 

Install the BJ cartridge again (see page 4-11) and clean the

to the BJ cartridge

print heads (see page 4-6).

Not printing on correct  

side of the media

Make sure that you load the media with the correct print
side up.