Canon 70 사용자 설명서

101

You can record Motion JPEG movies with the camcorder, from a tape in the camcorder

or from devices connected via the DV terminal or the AV terminal. The sound of a

movie recorded on a memory card will be monaural.

• You can keep recording until “CARD FULL” appears.

• With MultiMediaCards, the recording time is limited to 10 sec.

in 320 

× 240 pixels and 30 sec. in 160 × 120 pixels.

❍ Do not turn off the camcorder, change the position of the TAPE/CARD switch,

disconnect the power source, open the memory card cover or remove the
memory card while the card access indicator is flashing. Doing so could result
in data damage.

❍ When you are using a SD Memory Card, make sure that the protect switch is

set to allow recording.

❍ Do not load/unload a cassette during recording.

❍ We recommend using a Canon SD Memory Card, or a SD Memory Card that

guarantees a transfer rate of 2 MB/sec., right after you have formatted it with
this camcorder. With memory cards not formatted with this camcorder, or
when recording/erasing has been repeatedly performed, the writing speed may
be lower and recording may stop.

❍ You can select the focusing point when recording a movie on the memory

card.

❍ Users of Windows XP: When you plan to connect the camcorder to a

computer, keep the length of one movie shorter than approx. 12 min. in 
320

× 240 and 35 min. in 160 × 120.

CAMERA

CAMERA

(VCR)

PLAY

PLAY

NETWORK

POWER