Canon BJ-10sx 사용자 설명서

  

 

 

 

 

If an AC outlet is not available, you can use the remaining 
battery power for limited printing. Press 

to continue 

printing. Each time you press 

, the printer will print 

several lines until the battery pack is fully discharged. 

When the battery pack becomes fully discharge, a low battery 
error occurs. The 

POWER

 light starts to blink, the 

ON LINE 

light goes out, and the 

ERROR 

light goes on. In this case, you 

must recharge the battery. If you are in the process of printing, 
the only way to continue is to connect the AC adapter.

Recharge the battery as described in the previous section, 
Charging a Battery Pack.

CAUTION: Recharge the battery pack only when it is fully 
discharged. Charging the battery before it is fully discharged 
reduces the battery capacity.

 

 

 

 

 

 

NOTE: Make sure you have completed your current print job as 
removing the battery pack erases all data in the printer's memory.

Follow these steps to remove the battery pack: 

1. Make sure the battery switch is turned off.
2. Lift the printer and rotate the printer stand.
3. Hold the printer securely, and remove the battery 

compartment cover.