Canon 2162B002 사용자 설명서
Printing procedure
Basic Printing Workow
Printing procedure
Loading and Printing on Rolls
These are the basic steps for loading and printing on rolls.
Follow the steps below to switch to a new roll or a roll of a different type or width before printing.
Follow the steps below to switch to a new roll or a roll of a different type or width before printing.
Note
•
If you are not using the Media Take-up Unit, spread a clean cloth or paper on the oor before printing
long documents such as banners. Otherwise, use the optional Output Stacker. (→P.220)
The printing may become dirty by touching the oor, when the long sheet is printed.
The printing may become dirty by touching the oor, when the long sheet is printed.
•
If you prefer to wait for the ink to dry after printing and simply eject the document, you can deactivate
automatic cutting and cut the paper manually. (→P.191)
1.
Turn the printer on. (→P.18)
2.
Select a roll as the paper source. (→P.176)
140 Basic Printing Workow