Canon 2162B002 사용자 설명서
Other problems
Paper cannot be cut
Cause
Corrective Action
In the printer driver, No or Print Cut Guideline is
specied in Auto Cut .
specied in Auto Cut .
Specify Yes in Auto Cut in the printer driver.
In MAIN MENU , Eject or Manual is specied in
Cutting Mode .
Cutting Mode .
Specify Automatic in Cutting Mode in MAIN MENU .
The Cutter Unit is not installed.
Install the Cutter Unit .
(→P.699)
(→P.699)
Rolls are not cut when you are using the Media
Take-up Unit .
Take-up Unit .
Either execute Paper Cutting in the Control Panel or
lift the Release Lever and cut the roll with scissors.
(→P.237)
lift the Release Lever and cut the roll with scissors.
(→P.237)
The printer does not go on
Cause
Corrective Action
The printer is unplugged.
Plug the power cord into the outlet, and then turn on
the printer.
the printer.
The specied voltage is not supplied.
Check the voltage of the outlet and breaker.
For information on the specied voltage, see
“Specications”. (→P.133)
For information on the specied voltage, see
“Specications”. (→P.133)
Roll paper cannot be inserted into the Paper Feed Slot
Cause
Corrective Action
The roll paper is warped.
Straighten out curls and reload the roll.
Cannot Load Sheets
Cause
Corrective Action
The paper source selection is incorrect.
Press the Feeder Selection button to activate the
Cut Sheet lamp .
Cut Sheet lamp .
754 Troubleshooting