Xerox Phaser 2135 사용자 설명서

■

Place the printer on a level, solid surface with adequate strength for the weight of 
the machine. The base printer weight without any packaging materials is 68 kg 
(149 pounds).

■

The printer is heavy, and must be lifted by three people. The illustration below 
shows the proper technique for lifting the printer. 

■

Exercise care in moving or relocating the printer, it is back-heavy and could tip 
backward. Follow the recommended procedure when moving the printer from one 
location to another. Refer to the Phaser 2135 Setup Instructions.

■

Do not place any liquids on the printer.

Be careful when working in areas inside the printer identified with a 
warning symbol. These areas may be very hot and could cause personal 
injury.

■

Wait 10-15 seconds between switching the printer off and on.

■

Keep hands, hair, neckties, etc., away from the exit and feed rollers.

While printing, do not remove:

■

the media source tray that you have selected in the driver or front panel

■

any trays above the currently selected media source tray.

■

Do not open the covers while printing.

0748-01

0748-02