Xerox Printer fwww 사용자 설명서

.8   

<Maintenance>

Holding the handles on the new imaging unit, push the imaging unit 
until it sounds ‘click’ into the machine. 

Remove four dummy caps which are on the toner cartridge 
entrances of the imaging unit. When you remove the dummy cap 
from the cartridge, lift the handle up and pull it out.

• If you force too much to the dummy caps, it may cause 

problem.

Insert the toner cartridges and waste toner container into their 
corresponding slots until they click into place. 

Close the front cover firmly.

Turn the machine on.

• If the front cover is not completely closed, the machine will not 

operate.

• After rebooting, your machine will automatically reset the 

counter for the imaging unit.

• If the installation is completed properly, a guide report is 

printed out automatically. Wait for about 1.5 minutes for the 
machine to get ready.

• If there is a cracking sound, re-install the imaging unit. The 

imaging unit is not properly installed.