Epson R380 사용자 설명서
50
Maintaining Your Printer
8. If there are no gaps in the pattern, press
OK
to return to the Maintenance
menu.
If there are gaps in the pattern, press x
Start
to clean the print head again.
If you don’t see any improvement after cleaning four or five times, see page 57.
You can also turn the printer off and wait at least 6 hours or overnight. This
lets any dried ink soften. Then try cleaning the print head again.
You can also turn the printer off and wait at least 6 hours or overnight. This
lets any dried ink soften. Then try cleaning the print head again.
Tip:
If you do not use your printer often, it is a good idea to print a few pages at least once a
month to maintain good print quality.
If you do not use your printer often, it is a good idea to print a few pages at least once a
month to maintain good print quality.
Aligning the Print Head
If your prints look grainy or blurry, or you notice that vertical lines are not aligned
properly on the nozzle check pattern, you may need to align the print head.
properly on the nozzle check pattern, you may need to align the print head.
Note:
Make sure the front tray is in the paper (lower) position and the CD/DVD tray is not
inserted.
Make sure the front tray is in the paper (lower) position and the CD/DVD tray is not
inserted.
1. Make sure the printer is turned on and not printing.
2. Load several sheets of plain, letter-size paper.
3. Press the
Setup
button.
4. Press l or r to select
Maintenance
, then press
OK
.
5. Press u or d to select
Head Alignment
, then press
OK
.
6. Press the x
Start
button. Four rows of alignment patterns are printed.