Epson R380 사용자 설명서

Problems and Solutions

Check the solutions below if you’re having trouble using your printer.

■

The first time you install ink cartridges, the printer must charge its print head 
for about 2 minutes. Wait until charging finishes (when you see the message 
“Initialization is complete”) before you turn off the printer, or it may charge 
improperly and use excess ink the next time you turn it on. 

■

Turn off the printer, then make sure the ink cartridges are inserted completely 
and the ink cartridge cover is closed completely. Also make sure no packing 
material remains in the printer. Wait a moment, then turn the printer 
back on.

■

If the printer is turned on and the screen is black, press any button to activate 
the printer. Then press the button for the feature you want to use.

■

If you don’t see your photos on the screen, make sure they are in JPEG or 
uncompressed TIFF format and taken with a DCF-compliant camera. If you 
have used the printer to back up photos on a USB storage device, the printer 
will recognize only the photos in numbered folders on the device.

■

Make sure your paper is loaded short edge first and is positioned against the 
right edge with the left edge guide against its left side. Don’t load paper above 
the arrow mark inside the left edge guide.

■

Make sure the paper size settings are correct for the paper you are using.

■

If part of your image is cut off, try using the 

Fit to Frame

 setting. Or, try 

setting 

Expansion

 to 

Mid

 or 

Min

. See page 27 for more information.