Samsung GH68-14774A 전단

Guide No.: GH68-14774A
10/2007. Rev. 1.0

Thank you for purchasing the Samsung Bluetooth 
Mono Headset WEP430. We hope you will be 
delighted with its operation.
Take a moment before you get started to 
familiarize yourself with your new headset.

Make sure you have the following items with your 
headset: 

Make sure you have the following items with your 
headset: 

Charge the headset's battery fully before using 
the headset for the first time.

1 

 Put the adapter into the jack on the headset.

2  

Plug the adapter into an electrical outlet.

 

3

  Remove the adapter from the headset.

• Charge the headset until the red light on the  
   headset turns to blue.
• The headset will be fully charged in 
   approximately 2 hours and 30 minutes.

Before you can use your headset, you must pair it 
with your phone.

Indicator light

Ear-hook

Multi-Function

button

NOTE:
The headset is not able to operate while charging. 
Try connecting after charging is completed.

NOTE:
Your headset supports the Headset and/or Hands-Free 
Profile(s).

Start here

Charge your headset
Put your headset in pairing mode
Turn on Bluetooth on your phone and 
pair with headset
Test and use

Headquarters:
1301 East Lookout Drive Suite 150 
Richardson, TX 75082  

Internet Address: 
http://www.samsungmobileusa.com/
accessories

Customer Care Center: 
1-888-987-4357

Volume control

 buttons

Primary

 microphone

Adapter jack

Secondary
microphone

Adapter, User’s Guide

Adapter, User’s Guide

1 

 Set your Bluetooth phone to discover the  

    headset by following your phone's user guide. 

    Typically, the steps involve going to the Settings,
    Connection, or Bluetooth menu on your 
    phone and then selecting the option to discover
    Bluetooth devices.

    Your phone will find the Samsung WEP430 
    headset. 

2 

 Select Samsung WEP430. 

3 

 When the phone asks if you want to pair with it,

    confirm by selecting Yes or OK. 

4 

 Enter the headset passkey or PIN, 0000. 

Your phone and headset are now paired and 
ready to make and receive calls. To confirm 
they are operating properly, make a call:

1

 

 Place the headset over your ear. 

    See Wear the headset on the reverse 
    side of this guide.

2

 

 On your phone, make a call to the number 

    you want.

3

 

 If your phone and headset are successfully 

    paired, you will hear ringing on the headset.

After you have successfully paired your phone 
and headset, you do not need to repeat these 
initial setup steps each time you use the 
headset.

•   If you turn on the headset for the first time, it 
    proceeds into pairing mode immediately. 
    
•   If you have paired the headset with other Bluetooth  
    devices, make sure that the headset is off (see Turn 
    headset on or off on the reverse side of this guide). 
    Then press and hold the Multi-Function button until 
    the indicator light turns solid blue after blinking.