Epson 7000 사용자 설명서

The Ink Cartridge Holder is made up of six individual slots, one for each color 
of ink. The following instructions describe how to access and remove one of 
those slots.

1.

Drain the ink as described in the Clean Head section of “Adjustment 
Menu” on page 174.

2.

Remove the R Side Cover as described in “R Side Cover Removal” on 
page 114.

3.

Remove the L Side Cover as described in “L Side Cover Removal” on 
page 116.

4.

Remove the I/C Holder Cover as described in “I/C Holder Cover Removal” 
on page 116.

5.

Remove the H Top Cover as described in “H Top Cover Removal” on 
page 117.

6.

Remove the Cover-Open sensor cable and six Ink Cartridge sensor cables 
from the C299MAIN board (refer to Table 4-4, “C299MAIN Board 
Connectors,” on page 123 for details), and then remove the cables from 
their harness clamps.

7.

Pull out the cables through the opening in the L Side frame, and remove 
the cables from the four clamps.

8.

Remove two screws (CPP M3x8) securing the ink tube cover and remove 
the cover.

„

„