Epson 7000 사용자 설명서
EPSON Stylus Pro 7000
Revision B
Product Description
SelecType Settings
42
1.6.2 Test Print Menu
1.6.2.1 Nozzle check
The firmware version is described as the date the firmware was set.
BO = EPSON Stylus Pro 7000
28 = date
9 = last digit of year (1999 in this case)
C = month (16H, so 1 means January, A means October and C means
December)
28 = date
9 = last digit of year (1999 in this case)
C = month (16H, so 1 means January, A means October and C means
December)
The remaining capacity of the waste ink pads is shown as a percentage.
1.6.2.2 Status sheet
Head Gap = see Platen Gap in Printer Status Menu, page 44
Border Line = see Page Line in Printer Status Menu, page 44
Interface = See Table 1-31, “Printer Setting Menu,” on page 41
Parallel I/F = See Table 1-31, “Printer Setting Menu,” on page 41
Table 1-32. Test Print Menu
Display Message
Item
Notes
NOZZLE CHECK
Print
Check the printout, any missing lines
mean the nozzle(s) are clogged.
mean the nozzle(s) are clogged.
STATUS SHEET
Print
Prints the current printer settings.
Version: BO289C
Ink Pad: 94%
Ink Pad: 94%
Note: the actual pattern prints in color: black, cyan,
magenta, light cyan, light magenta, and yellow