Epson 7000 사용자 설명서

다운로드
페이지 231
EPSON Stylus Pro 7000
Revision B
Troubleshooting
Troubleshooting Using the Error Messages
85
Note: “Maintenance Call nnnn” is described in Table 3-3.
WARNINGS
Warning messages appear on the LCD display to warn users that a problem 
may occur. The printer can still print and there is no effect on print quality; 
however the messages do not go away until the possible problem is taken 
care of or the printer enters the corresponding error condition. For example, 
the Waste Ink Pads Near Full message will remain until the pads are replaced 
and the counter is reset or until the pads become full and the printer enters an 
error state.
Table 3-4.  Warning/Error Messages
Error Type
Message
Refer to 
Warning
Ink Low
Error
Paper Out
Load xxx Paper
Load Paper
Paper Jam
Cover Open
Paper Not Cut
Paper Not Straight
Reload Paper
Push Lever Down
Ink Out
No Ink Cartridge
Remove Paper
Option I/F Error
Table 3-5.  Ink Low
Item
Description
LCD 
message
Ink Low
LED indicator 
status
The LED indicator for the ink cartridge that is low flashes.
Details
The printer has received the Near-End signal from one of the ink 
low sensors. After the LCD displays the Ink Low warning, the 
printer can print about one A1 sheet at 100% duty. By all means, 
change the ink cartridge as soon as possible.
Once a “low-ink” cartridge has been removed, it will 
automatically cause an ink-end error if replaced in the printer.
Only replace empty or low cartridges with new, full cartridges; 
otherwise the ink counter cannot perform correctly.
Recovery
Replace the old ink cartridge with a new one.