Samsung ML-3051N 사용자 설명서

.4   

<Installing accessories>

Authentication is a process of identifying the legitimacy of an user to 
access a network. You can select whether or not authentication is used.

Press Menu until Network appears on the bottom line of the 
display and press OK.

Press the Scroll buttons until Wireless appears and press OK.

Press the Scroll buttons until Authentication appears and press 
OK

.

Press the Scroll buttons to select the type you want.
• Open System: Authentication is not used.
• Shared Key: Authentication is used.

Press OK to save your selection.

Press Stop to return to Standby mode.

If your network uses WEP encryption keys, you can must select the 
appropriate encryption type and configure encryption keys. You can 
configure up to four keys. The active key must match the key value and 
key position (for example, Key 1) configured on other wireless devices in 
the network.

Press Menu until Network appears on the bottom line of the 
display and press OK.

Press the Scroll buttons until Wireless appears and press OK.

Press the Scroll buttons until Encryption appears and press OK.

If you have set the authentication type to Open System, the 
Encryption

 menu does not display.

Set each encryption option and press OK.
• Encrypt. Type: Select an encryption type: None, 64-bit WEP, or 

.

• Key Type: Select the key type of your network.
• Using Key: Select the key to be used in your network.
• Edit Key: Enter the key number for the selected key position. The 

numbers you can enter as follows:

When you have finished, press Stop to return to Standby mode.

64-bit WEP

10 digits

5 characters

128-bit WEP

26 digits

13 characters